Mike Cuts the Square for the Anchor Point.

Mike Cuts the Square for the Anchor Point

Step 1: Use a utility knife or reciprocating saw to cut a square opening in the Airform and foam. Make sure the opening is bigger than the anchor’s base so you have room to work.

Image by Mike South via Monolithic Commons

CC BY 4.0

Download image

Original (1968×1312) / Huge (1920×1280) / Large (1600×1066) / Medium (1280×853) / Small (960×640) / Thumb (640×426)

Safety Starts at the Top: Anchor Points Make Dome Maintenance Easy